Author Topic: how to installation with real wood floor  (Read 504 times)

Offline qizhen0809

how to installation with real wood floor
« on: June 19, 2017, 12:40:49 pm »
the result that complain case to analyse to real wood floor through us for years makes clear, product quality is occupied about 10% the left and right sides, installation quality is occupied about 70% , use safeguard undeserved reach use environment to exceed mark to be occupied about 20% . Visible installation is improper the body that still seizes a floor to complain. Accordingly, the installation mistake phenomenon that the article complains row adduce floor middling to see reachs the harm of generation, the installation personnel of hope floor is caused take seriously, avoid to appear this kind of problem.
The installation means that one factory provides puts the mistake that be in
Graph 1 installation floor did not add moistureproof film
One of mistakes that install methodological existence are not to add moistureproof film, use this kind of method, when the balance moisture content of the moisture content that compares dry, keel to also compare dry, floor when the ground and used environment is consistent, the floor won't arise be out of shape. If the ground is compared damp or the moisture content of the floor is lower, made of baked clay shape of easy generation of the floor below the case with environmental bigger humidity is metamorphic. This kind of method is used below the case with use environment bigger change especially risk of existence floor metabolic is bigger.
Those who install the mistake that the method exists is direct on installation method tagged ground batten between the width of obligate aperture (2) seeing a picture. The balance moisture content of the actual moisture content of the width of the drying shrinkage coefficient that the obligate aperture between actually batten should plant according to the floor uses a tree, floor, floor and area will decide. For example, in the floor board that Hangzhou installs, it is when the moisture content of the floor 15% or be more than 15% when, if moistureproof measure reachs the designated position, need not stay between ground batten seam, if floor moisture content is in 8% the left and right sides, floor width is 125mm, likelihood some are out of shape obligate 2mm still meets bigger tree go in for farming to have wriggle through the earth or be squeezed between batten crack. So obligate aperture cannot be a fixed numerical value. The problem about aperture of floor science obligate will be discussed in the following article.
tool to make round rail fence
how to build a privacy wall on a deck
fiberon composite gate
buy composite board rocking chair